Digital Life Blog

About a year ago I was forced to use a screen protector. Less of the problem of scratch protection owed, rather than the AR coating of glossy displays my Hewlett-Packard TM2-2010eg Convertibles. This has a touch screen and so the film must meet some basic conditions so that the point of purchase warrants.And also what does the anti-reflection? What about the impact of touch-navigation or other possible problems? My experience with these films and also for smartphones has been gathered here once again.

What is good

The screen protector for touchscreens?

Films for displays not only in different sizes, but also in various thicknesses and materials. The latter depends on the purpose. A film for a device that only works with a pen input, has to meet structural requirements other than a screen protector for touchscreens. The digitizer works with pressure sensors and mechanisms of resistive touch screens. The finger is on the capacitive display, which is electrically charged and at the points where the finger comes in contact with the screen registers the tension and pressure as the unit is responsible. Especially when capacitive screen, it is important that the voltage is not influenced by the film. Can never be entirely ruled out that unfortunately, and so are strongly pressed to the tablet must be according to the material quality. The normal user will feel good in quality but hardly the difference.

Capacitive devices are more reactive and can be found in smartphones and tablets in most frequently. The resistive touch screen comes in older or special equipment to use, like my HP TM2 Convertible. Here are the requirements for the film are somewhat more complex. The resistance, the run of the fingers or the stylus on the tablet may be, will be affected by a screen protector for the capacitive type touch screens much easier. In addition, the pin acts as the predominant input means and the tip is not soft, therefore the film must have increased scratch resistance. The investment is usually gone after a few months since the roughened and scratching film not only looks ugly, but nothing brings. So what should my film cost and what should be taken when shopping?

What should I

Look for when buying?

Most are already saying the manufacturer of screen protectors, which units they are suitable. For the mobile phone or tablet, there are plenty to choose from, only the cheapest offer should not be accessed. The film is often so thin and poorly processed to ingratiate himself with later removal even under sunlight available.

.